SD-182

Model SD-182

Smoke Damper
Airfoil Blade

The SD-182 smoke damper employs triple-V blades for point-of-origin control of smoke in static and dynamic smoke management systems. The FSD-182 is qualified to 4,000 ft/min (20.3 m/s) and 8 in.wg. (2.0 kPa) and may be installed in, or adjacent to vertical walls or partitions, or horizontally in, or adjacent to floors or assemblies.


Standard Construction

Frame: 5" x 1" (127 x 25) galvanized steel hat channel with inerlocking corner gusset. Equivalent to 13 ga. (2.4) channel frame. Low profile head and sill are used on sizes less than 13" (330) high.
Blades: 6" x 14 ga. (152 x 2.0) galvanized steel - airfoil.
Side-Plate: 12" x 20 ga. (305 x 1.0) galvanized steel.
Axles: 1/2" (13) diameter plated steel hex.
Linkage: Concealed in frame.
Bearings: Stainless steel oilite, sleeve-type.
Seals: Silicone blade edge seals integrally rolled and mechanically fastened to blades. Flexible metal jamb seals.
Actuator: 120 VAC, power-open, spring-close, external mount. View Actuators.  
Minimum Size: 8" x 6" (203 x 152)
Maximum SizeSingle Section: 36" x 48" (914 x 1219)
                           Multiple Section: 144" x 96" (3658 x 2438) or
                                                       288" x 48" (7315 x 1219)


Ratings

UL 555S Leakage Class: 2 
Maximum Temperature: 350oF (177oC)

UL 555 and 555S Listing: R14981
CSFM Listing: 3230-1404:107
New York City MEA Listing: 295-98-E
Meets NFPA Standards: 90A, 92A, 92B and 101
Meets Building Code Standards: IBC, NBC, NFPA, SBC and UBC